Like with most industries, there is a standard of care in the mold remediation industry that determines the methods that those working in the industry must follow to ensure that they properly help their customers recover from their mold problems. If mold problems are not handled within the standards of care, the conditions might worsen to the point where the building must be evacuated.

Challenges Regarding Building Inspections

Inspecting a building to determine the cause of a mold problem can be very challenging, especially when those who are performing the inspections are not performing the correct procedures to ensure that the mold is properly identified and eliminated. Not only must the mold be identified, but the source of the mold.

One difficulty is if the structure operates 24/7 and is a critical use structure. The continue operation of the building might be necessary for the lives of the building occupants. Under these circumstances, it may be difficult to implement the mold remediation practices that are necessary to correct the mold problem.

The Consequences Of Not Handling A Mold Problem Early

If workers can present evidence that they are experiencing illnesses that are related to the mold problem, this can be used as a reason to seek and successfully receive financial compensation. Also, inspectors will need to have uncovered previous evidence of mold contamination.

After mold has been cleaned up, the area must be inspected by an environmental expert. Appropriate documentation must be kept of how the mold remediation process proceeded to ensure that it has been done properly. This documentation must be kept by project management.

Correcting The Source Of The Mold Problem

Rather than simply cleaning up the mold, it is important that the sources of mold contamination are eliminated so that the mold does not grow further. When the mold spores begin to spread through the air, it can be difficult to correct the problem and the mold will spread more rapidly.

Mold must not be simply covered up or isolated. Mold must be physically removed from the structure. Otherwise, the mold spores will land on other surfaces and will spread.

Moisture problems that lead to the original contamination of the property need to be corrected so that mold does not try to grow within the structure again. Moisture problems usually include pipes that are leaking, dampness, and cracks or holes that allow for moisture from outside to seep in. Contact a company, such as Armstrong West, for more information.